|
|
 |
|
Roadplayer Billiards offers a wide variety of pool cue tip maintenance
products to help you maintain your tip and keep it playing properly. Avoid costly miscues and play your very best!!!
|
|
|
Click on the picture of your choice to see an enlarged picture.
|
|
|
|
The Tip Pik contains dozens of needles which properly prepare your cue tip for peak performance. The tiny dimples allow chalk
to be retained, and help the tip to grip the cue ball. Better grip means better english.
|
|
Ultimate Tip Tool Refills
|
|
|
When the abrasive inserts on your Ultimate Tip Tool wear out, you don't have to replace the entire tool, just the inserts.
This package contains two shaper/scuffer replacement discs and two side trimmer pieces.
|
|
Sterling Tenon-Cutting Machine
|
|
|
Sterling Tenon-Cutting Machine This machine allows anyone to make a perfect tenon for the fiber ferrules used on most
house cues. A tenon is the part of the shaft that the (normally white) ferrule is glued to. The ferrule protects the end of
the cue from splitting. When the ferrule gets worn out it's time for a new one. This machine cuts old ones off and prepares
the tenon for new ones. Just slip the machine over the top of the cue and tighten down the collet to the desired height. Adjust
the set screw for the desired diameter and then just pull the blade in and shave off the excess. Perfect for those who wish
to do their own work on house cues without investing thousands in a lathe. Requires a little practice but once mastered makes
life so much easier when doing those dreaded house cue chores. With practice this machine even helps to trim the tips and
get them in perfect shape.
|
|
|
|
|
|
Shape and scuff your tip with a 1" square of aluminum with embedded carbide. One side shapes your cue tip to a perfect radius
while the other scuffs the tip for optimum chalk retention.
|
|
Cue Cube & Shaft Slicker Combo Pack
|
|
|
This Cue Cube Maintenance Kit comes with the Cue Cube Shaft Slicker and the Cue Cube Scuffer. These products will provide
you with an ultra smooth shaft and precise tip shaping control. Shape and scuff your tip with a 1" square of aluminum with
embedded carbide. One side shapes your cue tip to a perfect radius while the other scuffs the tip for optimum chalk retention.
The shaft slicker is used to burnish your shaft, giving it a polished look and feel and enabling it to slide smoothly through
your fingers.
|
|
|
|
|
|
Cue Cube Colors Shape and scuff your tip with a 1" square of aluminum with embedded carbide. One side shapes your cue tip
to a perfect radius while the other scuffs the tip for optimum chalk retention. The colored Cue Cubes are available in red,
black, yellow, blue, or green.
|
|
8mm Weight Bolt Adjustment Tool
|
|
|
This T-handled 8mm Allen key is used to insert, remove, or reposition weight bolts in Sterling cues. This is a must
for dealers wanting the ability to change cue weights or balances.
|
|
|
|
|
|
This tip sander is used to shape and scuff tips. A piece of sandpaper is encased in an extruded plastic channel, allowing
you to easily control the shaping and scuffing. It is available in your choice of length
|
|
|
|
|
|
This tip tapper can go on your key chain, or just about anywhere. It is compact, and is used to flatten the nap on your
cue tip for more consistent play. It also helps by forcing chalk into the leather, reducing the chance of a miscue, and allowing
you to exert better cue ball control.
|
|
|
|
|
|
This classy tip tapper can go on your key chain, or just about anywhere. It is compact, and is used to flatten the nap on
your cue tip for more consistent play. It also helps by forcing chalk into the leather, reducing the chance of a miscue,
and allowing you to exert better cue ball control.
|
|
Williard's Pro Shaper, Nickel
|
|
|
The Willard Scuffer - Pro has a .415 Inch radius (Nickel).
|
|
Williards Champ Shaper, Dime
|
|
|
The Willard Scuffer - Pro has a .358 Inch radius (dime).
|
|
|
|
|
|
The Sportsman Tool is a multifaceted tool - it is a cue tip shaper with a bottle opener. Just like Willard's Cue Tip Shapers,
the Sportsman Tool has a carbide grit shaping device and a precision gauge. The Sportsman Tool has a .415 in. (nickel) radius.
Use this convenient tool for correctly-shaped tips every time!
|
|
|
|
|
|
These scuffers measure almost 2" in diameter. They are dish-shaped, and are lined with a coarse abrasive material.
Hold it in the palm of your hand, and shape your tip for better playability, or scuff it for better chalk retention. The
round metal scuffer has a convenient hole to allow it to easily go on a key chain or to be attached to your case.
|
|
Pool Cue Pocket Shaper/Scuffer
|
|
|
Pool Cue Pocket Shaper/Scuffer This pocket-sized tip tool shapes your tip on one side, and scuffs it on the other. It is
made from a durable plastic that is lined with a coarse-grit abrasive. A scuffed tip will hold chalk better, reducing the
chance of a miscue. A properly-shaped tip will allow you better cue ball control.
|
|
|
|
|
|
This tool is used when re-tipping your cue. Once you have removed the old tip, the cue top sander clamps onto your shaft
and allows you to perfectly sand off the residual leather and glue, properly preparing the ferrule for the new tip. This
is an important step for a quality tip replacement.
|
|
Replacement Disks For The Rapid Top Cue Sander
|
|
|
These sanding discs are used with the cue top sander. The set contains 12 refills.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100% Satisfaction Guaranteed Shopping
You Can E-Mail Us At:
Roadplayer Billiards P.O. Box 126 Pocatello Id. 83204
CopyRight (c) 2008 Roadplayer Billiards All Rights Reserved
|
|
|
|
